Publikációk listája


SZTE TTIK Optikai és Kvantumelektronikai Tanszék

Lézer-anyag Kölcsönhatási Kutatócsoport




1989.


  1. G. Kovács, F. Ignácz, B. Hopp: "High stability, low jitter, low RFI noise TEA N2 laser". 2nd Symposium on Laser Spectroscopy (Pécs-Harkány, 1989. okt. 17-20.)


1991.


  1. Klebniczki J., Zs. Bor, Hebling J., Hopp B., Hajós G., H. A. Hazim: "10 mikrométernél vékonyabb folyadéksugár előállítása és alkalmazása fetéklézerekben". ("A hazai kvantumelektronika eredményei" jubileumi szimpózium, 1991. okt. Budapest)


  2. Hopp B., Rácz B., Bor Zs., Szabó G.: "Polimerek felületének struktúrája ArF excimer lézeres fotoablálás után". ("A hazai kvantumelektronika eredményei" jubileumi szimpózium, 1991. okt. Budapest)


  3. Hopp B., Rácz B., Bor Zs., Szabó G., Ignácz F.: "Orvosi szilikongumi ArF excimer lézerrel történő fotoablációjának vizsgálata". ("A hazai kvantumelektronika eredményei" jubileumi szimpózium, 1991. okt. Budapest)


  4. Bor Zs., Rácz B., Szabó G., Hopp B., Süveges I., Mohay J.: "Szaruhártya excimer lézeres ablációja". ("A hazai kvantumelektronika eredményei" jubileumi szimpózium, 1991. okt. Budapest)


1992.


  1. P. Heszler, Zs. Bor, B. Hopp, E. Homolya: "Accumulation (incubation) process of PET upon 337.1 nm radiation". Spectrochimica Acta, 48A, No. 1, 41-44, 1992


  2. Zs. Bor, B. Rácz, G. Szabó, B. Hopp, I. Süveges, J. Mohay, I. Ratkay: "Time resolved study of shock wave formation during excimer laser ablation of the cornea". Conference on Laser and Electro-Optics, May 10-15, 1992, Anaheim, California, USA; CThL6)


  3. Mohay J., Süveges I., Ratkay I., Füst Á., Bor Zs., Szabó G., Rácz B., Hopp B., Virágh Sz.: "Szaruhártya scanning elektronmikroszkópiás vizsgálata excimer laser keratectomiát követően". (Szemészet, 129, 31-33, 1992.)


  4. Ratkay, Á. Füst, I. Süveges, B. Hopp: "Excimer laser ablation of the cornea". (XVI-th International Meeting of Ophthalmologists Alpe-Adria, Győr, 3-4. September 1992)


  5. I. Ratkay, Á. Füst, J. Mohay, I. Süveges, G. Szabó, B. Hopp, B. Rácz, Zs. Bor: "Scanning electron microscopical study of corneal incisions induced by an excimer laser". (Second Annual Congress Summit International Laser User Group, September 4-6, 1992, Montreaux, Switzerland)


  6. Dr. Farkas Éva, Dr. Szanka Károly, Hopp Béla: "Kísérleti fizika vegyész hallgatóknak" egyetemi jegyzet (1992.)


1993.


  1. Bor Zs., Rácz B., Szabó G., Hopp B., Márton Zs.: "Fotoabláció excimer lézerekkel". ("A lézerek tudományos és gyakorlati alkalmazásai" Téli Iskola, 1993. február 15-18, Esztergom)


  2. Zs. Bor, B. Hopp, B. Rácz, G. Szabó, I. Ratkay, I. Süveges, Á. Füst, J. Mohay: "Plume emission, shock wave and surface wave formation during excimer laser ablation of the cornea". Refractive & Corneal Surgery vol. 9, March/April, 111-115, 1993


  3. Zs. Bor, B. Hopp, B. Rácz, G. Szabó, Zs. Márton, I. Ratkay, J. Mohay, I. Süveges, Á. Füst: "Physical problems of excimer laser cornea ablation". Optical Engineering vol. 32, October, 2481-2486, 1993


  4. Zs. Bor, B. Hopp, Zs. Márton, Z. Gogolák, F. Ignácz: "Ultrafast photography of shock waves originating from an ablated surface". SPIE Vol. 1983, 748, 1993


  5. Zs. Bor, B. Hopp, B. Rácz, G. Szabó, Zs. Márton, F. Vincze: "Study of the ArF excimer laser ablation of the cornea".SPIE Vol. 1983, 902, 1993


  6. Z. Bor, G. Szabó, B. Hopp, Zs. Márton, T. Juhász: "Dynamics of laser ablation of biological tissues". The Second International Conference on Laser Ablation, April 19-22, Knoxville, p. 483, 1993


  7. B. Hopp, Zs. Bor, B. Rácz, G. Szabó: "Ultrafast photography of physical processes", in "Ultrashort Processes in Condensed Matter", NATO ASI Series B: Physics Vol. 314, 1993


  8. B. Rácz, Zs. Bor, B. Hopp, G. Szabó, I. Süveges, J. Mohay, I. Ratkay and Á. Füst: "Ultrafast photography of the cornea ablation", Lasermedizin Vol.9 127, 1993


1994.


  1. Vincze Felicia Lilla, Hopp Béla: "Szaruhártya-szobrászat", Természet Világa, Január, p. 20., 1994


  2. J. Klebniczki, J. Hebling, B. Hopp, G. Hajós, Z. Bor: "Fluid jet with variable thickness in the range of 5-20 mm", Measurement Science and Technology, 5, 601-603, 1994


  3. Z. Tóth, B. Hopp, Z. Kántor, F. Ignácz, T. Szörényi, Z. Bor: "Dynamics of excimer laser ablation of thin tungsten films Studied by fast photography", in Laser Materials Processing: Industrial and Microelectronics Applications Proc. SPIE 2207, 1994


  4. Hopp Béla, Csete Mária, Szabó Gábor, Bor Zsolt: "PMMA excimer lézeres ablációjának dinamikai vizsgálata", Kvantumelektronika '94, Budapest, 1994. október 19.


  5. Tóth Zsolt, Hopp Béla, Bor Zsolt: "Vékonyrétegek lézeres ablációjának vizsgálata ultragyors fényképezéssel", Kvantumelektronika '94, Budapest, 1994. október 19.


  6. Sneider János, Hopp Béla, Szabó Gábor, Bor Zsolt: "Abláció során keletkező struktúrák vizsgálata AFM-mel", Kvantumelektronika '94, Budapest, 1994. október 19.


  7. Hopp Béla, Zane Ball, Csete Mária, Ignácz Ferenc, Rácz Béla, Szabó Gábor, Ronald Sauerbrey: "ArF excimer lézer indukált vezetőképesség változás dinamikai vizsgálata polyimiden", Kvantumelektronika '94, Budapest, 1994. október 19.


1995.


  1. Z. Kocsis, B. Hopp, I. Mudra: "Modification of conductivity of silver salt filled polyimide film by pulsed KrF laser", Sixth Joint Vacuum Conference, April 4-7 1995, Bled, Slovenia


  2. Z. Tóth, B. Hopp, Z. Kántor, F. Ignácz, T. Szörényi, Z. Bor: "Dynamics of excimer laser ablation of thin tungsten films as followed by ultrafast photography, Appl. Phys. A 60, 431-436, 1995


  3. B. Hopp, M. Csete, G. Szabó, Zs. Bor: "Time resolved study of ArF excimer laser ablation processes of PolyMethylMethAcrylate (PMMA)", Appl. Phys. A 61, 339-345, 1995


  4. Z. Kocsis, Zs. Kincses, I. Mudra, B. Hopp, G. Ripka, I. Hajdu: "Investigation of excimer laser induced modification of conductivity of silver salt filled polyimide film", 4th European Conference on Advanced Materials and Processes, 25-28 September 1995, Padua, Italy


  5. Z. Ball, B. Hopp, M. Csete, F. Ignácz, B. Rácz, G, Szabó, R. Sauerbrey: "Transient optical properties of excimer laser irradiated polyimide I: Refractive index", Appl. Phys. A 61, 547-551, 1995


  6. Z. Ball, B. Hopp, M. Csete, F. Ignácz, B. Rácz, G, Szabó, R. Sauerbrey: "Transient optical properties of excimer laser irradiated polyimide II: Carbon-cluster scattering", Appl. Phys. A 61, 575-578, 1995


  7. G. Szabó, B. Hopp, M. Csete, B. Rácz, Z. Ball, R. Sauerbrey: ”Mechanism of Laser Ablation; Time Resolved Studies", Conference on Laser and Electro-Optics, 1995. invited lecture


1996.


  1. Z. Kocsis, Z. Kincses, B. Hopp, G. Ripka, I. Mojzes: "Noise investigation of ultraviolet laser induced grain structure in polyimide films", Jurnal of Electronic Materials 25:3, 1996


  2. B. Hopp, M. Csete, K. Révész, J. Vinkó, Zs. Bor: "Formation of the surface structure of polyethylene terephtalate (PET) due to ArF excimer laser ablation" Appl. Surf. Sci. 96 98, 611-616, 1996


1997.


  1. B. Hopp, Z. Szilassi, K. Révész, Z. Kocsis, I. Mudra: "Excimer laser induced conductivity of silver salt filled polyimide film"; Appl. Surf. Sci. 109/110 212-217, 1997


  2. B. Hopp, Zs. Bor, E. Homolya, E. Mihalik: "Investigation of conical structures created by ArF excimer laser irradiation of polycarbonate" ; Appl. Surf. Sci. 109/110 232-235, 1997


  3. K. Révész, B. Hopp, Zs. Bor: "Excimer laser induced surface chemical modification of teflon" ; Appl. Surf. Sci. 109/110 222-236, 1997


  4. Z. Szilassi, B. Hopp, I. Mudra, G. Ripka, I. Mojzes: "A novel possible theoretical model of the excimer laser induced development of conductive carbon layer on polyimide"; Micro Materials '97 April 16-18, Berlin, Germany


  5. B. Hopp, Zs. Bor, E. Homolya, E. Mihalik: "Conical structures produced by excimer laser irradiation of polymers", Proc. SPIE Vol. 3423, p. 389-393, 1997


  6. B. Hopp, A. Nógrádi, K. Révész, Zs. Bor, L. Kolozsvári: "Surface roughness investigations of excimer laser ablated cornea", Proc. SPIE Vol. 3423, p. 441-445, 1997


  7. B. Hopp, K. Révész, Zs. Bor: "High tensile strength sticking induced by ArF excimer laser surface treatment of poly(tetrafluoroethylene)", Proc. SPIE Vol. 3423, p. 394-398, 1997


  8. Z. Szilassi, B. Hopp, I. Mudra, G. Ripka, I. Mojzes: "New results of the investigation of excimer laser induced conductive carbon layer on polyimide"; 20th International Spring Seminar on Electronic Technology ISSE '97, 1997


  9. K. Révész, B. Hopp, Zs. Bor: “Excimer laser induced surface photochemical reaction of 1,2-diaminoethane with polytetrafluoro-ethylene”, Langmuir, 13, 5593-5601, 1997


  10. Tóth Zs.,
    Hopp. B., Ignácz F., Kántor Z., Szörényi T., Bor Zs.: “Volfrám vékonyrétegek ablációjának vizsgálata gyorsfényképezéses eljárással”, A JATE TTK oktatási és kutatási tevékenysége 1995-1996, 1997


  11. Bor Zs., Rácz B., Hopp B., Szabó G. D. Xenakis, C. Kalpouzos, C. Fotakis: “Femtoszekundumos excimer lézerrel besugárzott polimerek felületi reflexió változásának időbeli vizsgálata”, Kvantumelektronika ’97, Budapest okt. 30.


  12. Hopp B., Nógrádi A., Révész K., Bor Zs., Kolozsvári L.: “Excimer lézerrel ablált humán cornea morfológiai vizsgálata”, Kvantumelektronika ’97, Budapest okt. 30.


  13. Hopp B., Szíj Z., Csete M., Ignácz F., Bor Zs.: “Folyadékok excimer lézeres ablációjának vizsgálata”, Kvantumelektronika ’97, Budapest okt. 30.


  14. Tóth Zs., Hopp B., Ignácz F., Bor Zs.: “Volfram és króm vékonyrétegek excimer lézeres ablációjának in-situ vizsgálata”, Kvantumelektronika ’97, Budapest okt. 30.


  15. Hopp B., Révész K., Csete M., Ignácz F., Szabó G., Rácz B., Bor Zs.: ”Polimerek excimer lézeres ablációs mechanizmusának vizsgálata”, A JATE TTK oktatási és kutatási tevékenysége 1995-1996, 1997


  16. Zs. Bor, M. Csete, M. Erdélyi, Zs. Geretovszky, P. Heszler, B. Hopp, Z.Horváth, Z. Kántor, B. Rácz, K. Révész, G. Szabó, T. Szörényi, and Zs. Tóth: “Surface Structuring by Laser-based Techniques, in Nanotechnology, a dedicated tool for the future, Eds.: I. Mojzes and B. Kovács, ISBN 963-8531657, MIL-ORG. Ltd, NETI, Budapest, pp. 67-105, 1997


  17. E. Mihalik E. Nagy, K Kálmán, B. Hopp, Zs. Bor: “Laser ablation: a new technique in sample preparation of botanical materials for SEM”, 3rd Multinational Congress on Electron Microscopy, Portoroz, Slovenia, October 5-8, 1997


  18. Mihalik E., Kálmán K., Nagy E., Hopp B., Bor Zs.: “Lézer ablációs módszer alkalmazása növényi mikroszkópos preparátumok készítésében”, IX. Magyar Növényanatómiai Szimpózium, Szeged, Szept. 10-12., 1997


  19. M. Kozma, B. Hopp, T. Varga: “Comparative examination of the surface thermal damage of dental composites”, XVIIth Congress of the International Academy of Legal Medicine, Dublin, Aug. 20-23, 1997


1998.


  1. Z. Szilassi, S. Chichak, A. Kikineski, B. Hopp, I. Mojzes, G. Ripka: “On the electrical conduction of laser-treated polyimide”, ISSE ’98, Neusiedl am See, Austria, May 4-7, 165-168, 1998


  2. Z. Szilassi, B. Hopp, S. Kökényesi, F. Ignácz, G. Ripka, I. Mojzes: “Comparative study of the electrical conductivity increase of polyimide induced by excimer laser irradiation in air and nitrogen atmosphere”, 9th International Conference on Modern Materials and Technologies, Symposium III - Surface Engineering (ISBN:88-86538-21-9), 631-638, 1998


  3. B. Hopp, Zs. Bor, B. Rácz, G. Szabó, D. Xenakis, C. Kalpouzos, C. Fotakis: “Single shot picosecond time-resolved measurement of the transient reflectivity increase of ablated polymer surfaces”, 9th International Conference on Modern Materials and Technologies, Symposium III - Surface Engineering (ISBN:88-86538-21-9), 337-342, 1998


  4. Z. Tóth, B. Hopp, F. Ignácz, Zs. Bor: “Ultrafast photography of early stages of excimer laser ablation of thin metal films”, 9th International Conference on Modern Materials and Technologies, Symposium III - Surface Engineering (ISBN:88-86538-21-9), 343-350, 1998


  5. L. Kolozsvári, A. Nógrádi, B. Hopp, Zs. Bor: “UV absorption of anterior corneal layers in the 240-400 nm spectral range”, XXVIII International Congress of Ophthalmology, Amsterdam, Netherland, June 21-26, 1998


  6. B. Hopp, Zs. Márton, M. Csete, F. Ignácz, Zs. Bor: “Investigation of changes in optical properties of excimer laser irradiated polymers”, Proc. SPIE Vol. 3423, p. 441-445, 1998


  7. Zs. Tóth, T. Smausz, B. Hopp, F. Ignácz, Z. Kántor, T. Szörényi, Zs. Bor: “Ultrafast photographic investigation on laser ablation of liquid metals”, Proc. SPIE Vol. 3573, p. 142-145, 1998


  8. Zs. Márton, B. Hopp, Zs. Tóth, M. Csete, F. Ignácz, Zs. Bor: “Velocity measurements in tne nanosecond range realised by variably delayed dye laser exposition”, SPIE Vol. 3704, 291-296, 1998


  9. B. Hopp, Zs. Tóth, Z. Kántor, T. Smausz, T. Szörényi, Zs. Bor: “Time-resolved study of excimer laser ablated molten metals”, Precision Machining: Laser Beam Micromachining, Proceedings of the 10th Hungarian-Korean Seminar, p109, 1998


1999.


  1. Z. Tóth, B. Hopp, T. Smausz, Z. Kántor, F. Ignácz, T. Szörényi, Zs. Bor: “Excimer laser ablation of molten metals as followed by ultrafast photography” Appl. Surf. Sci. 138-139, 130-134, 1999


  2. Zs. Tóth, B. Hopp, T. Szörényi, Zs. Bor, E. A. Shakhno,V. P. Veiko: “Pulsed laser ablation mechanisms of thin metal films” EOS/SPIE Conference on Industrial Lasers and Inspection 14-18 June 1999. Munich Germany


  3. B. Hopp, Zs. Tóth, K. Gál, Á. Mechler, Zs. Bor, S. D. Moustaizis, S. Georgiou and C. Fotakis: “Time-resolved investigation of transient surface reflection changes of subpicosecond excimer laser ablated liquids” Appl. Phys. A 69, S191-194, 1999


  4. Zs. Márton, P. Heszler, Á. Mechler, B. Hopp, Z. Kántor, Zs. Bor: “Time resolved shock-wave photography above 193-nm excimer laser-ablated graphite surface” Appl. Phys. A; 69, S133-S136, 1999


2000.


  1. Zs. Tóth, B. Hopp, Á. Mechler, Zs. Bor, S. D. Moustaizis, S. Georgiou, C. Kalpouzos and C. Fotakis: “Reflectivity transients on solid surfaces induced by 0.5 ps high power excimer laser irradiation”, Laser Physics vol.10, 241-245, 2000


  2. Nógrádi, B. Hopp, K. Révész, G. Szabó, Zs. Bor, L. Kolozsvári: “Atomic force microscopic study of the human cornea following excimer laser keratectomy”, Exp. Eye Res. 70, 363-368, 2000


  3. Hopp, T. Smausz, T. Wittmann, F. Ignácz: “Comparative time-resolved study of solid-state and liquid ablation of polyethylene-glycol 1000: temperature, viscosity and surface tension dependence”, Appl. Phys. A.71, 315-318, 2000


  4. Váradi László, Hegyi Árpád, Hopp Béla: “Narkotikumok alkalmazása a halszállításban” Halászat, 93. évfolyam, 44. old. 2000


  5. T. Smausz, B. Hopp, Cs. Vass, Z. Tóth: “Experimental study on droplet generation during pulsed laser deposition of polyethylene-glycol 1000”, Appl. Surf. Sci. 168, 146-149, 2000


  6. B. Hopp, T. Smausz, E. Tombácz, T. Wittmann, F. Ignácz: “Solid-state and liquid ablation of polyethylene-glycol 1000: temperature dependence”, Opt. Com. 181, 337-343, 2000


  7. Zs. Márton, B. Hopp, Z. Kántor, G. Sáfrán, G. Radnóczi, O. Geszti, P. Heszler: “Surface phenomena during ArF laser heating of graphite: model calculations, fast photographic and electron microscopic imaging” Appl. Surf. Sci. 168, 154-157, 2000


  8. JY. Zhang, B. Hopp, Z. Geretovszky, I.W. Boyd: “Photo-deposition of tantalum pentoxide film using 222 nm excimer lamps”, Appl. Surf. Sci. 168, 307-311, 2000


  9. Hopp Béla, Smausz Tomi, Ignácz Ferenc, Bor Zsolt: “Mikrométeres méretű részecskék excimer lézeres darabolása, megsemmisítése”, Kvantumelektronika 2000, P-53


  10. Márton Zsuzsanna, Hopp Béla, Kántor Zoltán, Heszler: Péter “Felületi jelenségek a grafit ArF lézeres ablációja során”, Kvantumelektronika 2000, P-54


  11. Smausz Tomi, Kresz Norbert, Hopp Béla: “Teflon excimer lézeres ablációja során keletkező részecskék számának vizsgálata a besugárzott felület érdességének függvényében”, Kvantumelektronika 2000, P-56


  12. Geretovszky Zsolt, Hopp Béla és Ian W. Boyd: “Polimerek besugárzása 172 nm-es ultraibolya fotonokkal”, Kvantumelektronika 2000, P-59


2001.


  1. B. Hopp, T. Smausz, A. Rácz, Z. Bor: “Excimer laser destruction of micrometer size particles in a gas volume”, J. Appl. Phys. 89, 1493-1496, 2001


  2. T. Smausz, N. Kresz, B. Hopp: "Target morphology dependence of the particulate generation during excimer laser ablation of polytetrafluoroethylene", Appl. Surf. Sci Vol 177/1-2, 66-72, 2001


  3. L. Kolozsvári, A. Nógrádi, B. Hopp, Z. Bor: “UV absorbance of the human cornea in the 240-400 nm range”, XIII. Congress European Society of Ophthalmology, Istanbul, 3-7 June 2001


  4. I. Ratkay-Traub, B. Hopp, Zs. Bor, L. Dux, D.L. Becker, T. Krenács: „Regeneration of rabbit cornea following excimer laser photorefractive keratectomy”, Exp. Eye. Res. 73, 291-302, 2001


2002.


  1. B. Hopp, N. Kresz, Cs. Vass, Z. Tóth, T. Smausz, F. Ignácz: Spatial separation of fast and slow components of pulsed laser plumes”, Appl. Surf. Sci. 186, 298-302, 2002


  2. B. Hopp
    , Zs. Geretovszky, I. Bertóti and I. W. Boyd: Comparative tensile strength study of the adhesion improvement of PTFE by UV photon assisted surface processing, Appl. Surf. Sci. 186, 80-84, 2002


  3. Zs. Geretovszky, B. Hopp, I. Bertóti and I.W. Boyd: “Photodegradation of polycarbonate under narrow band irradiation at 172 nm”, Appl. Surf. Sci. 186, 85-90, 2002


  4. L. Kolozsvári, A. Nógrádi,
    B. Hopp, Z. Bor:”UV absorbance of the human cornea in the 240-to 400-nm range, Invest. Ophth. Vis. Sci. 43 (7): 2165-2168 JUL 2002


  5. T. Smausz, B. Hopp, N. Kresz: „Pulsed laser deposition of compact high adhesion PTFE thin films”, J. Phys. D: Appl. Phys. 35 No. 15, 1859-1863 2002


2003.


  1. B. Hopp, T. Smausz, P.M. Nagy, A. Juhász, F. Ignácz, Z. Márton: „Production of biologically inert Teflon thin layers on the surface of allergenic metal objects by pulsed laser deposition technology” Appl. Phys. A 76, 731-735 2003


  2. B. Hopp, T. Smausz, N. Kresz, F. Ignácz: “Adhesion strength measurements of excimer laser treated PTFE surfaces using liquid photoreagents” 3rd GR-I International Conference on New Laser Technologies and Applications, Szeptember 4-9. 2002., Patrasz, Görögország, Proceedings of SPIE Vol. 5131, 190-194 2003


  3. T. Smausz, B. Hopp, N. Kresz, Cs. Vass: „The influence of particulate size on the formation of compact polytetrafluoroethylene thin films during pulsed laser deposition” 3rd GR-I International Conference on New Laser Technologies and Applications, Szeptember 4-9. 2002., Patrasz, Görögország, Proceedings of SPIE Vol. 5131, 274-278 2003


  4. Cs. Vass, B. Hopp, T. Smausz: “Laser induced backside wet etching of fused silica: absorption coefficient dependence” 3rd GR-I International Conference on New Laser Technologies and Applications, Szeptember 4-9. 2002., Patrasz, Görögország, Proceedings of SPIE Vol. 5131, 200-204 2003


  5. Kresz Norbert, Smausz Tomi, Pelsőczi K. István, Turzó Kinga, Hopp Béla: ArF excimer lézerrel besugárzott emberi fogak felületének vizsgálata pulzáló erő üzemmódú atomi erő mikroszkóppal, Kvantumelektronika 2003, Budapest, Október 21.


  6. Smausz Tomi, Hopp Béla, Huszár Helga, Kecskeméti Gabriella, Pelsőczi K. István, Turzó Kinga: „Fog-vékonyréteg előállítása impulzus lézeres vékonyrétegépítéssel”, Kvantumelektronika 2003, Budapest, Október 21.


2004.


  1. B. Hopp, N. Kresz, J. Kokavecz, T. Smausz, H. Schieferdecker, A. Döring, O. Marti, Z. Bor: „Adhesive and morphological characteristics of surface chemically modified polytetrafluoroethylene films”, Appl. Surf. Sci. 221 (1-4): 437-443 JAN 15 2004


  2. Cs. Vass , B. Hopp , T. Smausz and F. Ignácz: „Experiments and numerical calculations for the interpretation of the backside wet etching of fused silica”, Thin Solid Films, Volumes 453-454, Pages 121-126 April 2004


  3. N. Kresz, J. Kokavecz , T. Smausz , B. Hopp , M. Csete , S. Hild and O. Marti: „Investigation of pulsed laser deposited crystalline PTFE thin layer with pulsed force mode AFM”, Thin Solid Films, Volumes 453-454, Pages 239-244 April 2004


  4. B. Hopp, R. Hegedüs, C. Vass, T. Smausz, Zs. Bor: „Three-dimensional photography and reconstruction of jets and droplets ejected from the surface of excimer laser ablated molten polyethylene-glycol 1000”, Appl. Phys. A 79, 779-782 (2004)


  5. T. Szörényi,
    B. Hopp, Z. Geretovszky: “A novel PLD configuration for deposition of films of improved quality: a case study of carbon nitride” Appl. Phys. A 79, 1207-1209 (2004)


  6. T. Smausz, B. Hopp, H. Huszár, Z. Tóth, G. Kecskeméti: “Pulsed laser deposition of bioceramic thin films from human tooth”, Appl. Phys. A 79, 1101-1103 (2004)


  7. Z. Tóth,
    B. Hopp, J. Klebniczki, N. Kresz, Zs. Bor, D. Anglos, C. Kalpouzos, C. Fotakis: „Expansion velocities of 0.5 ps KrF excimer laser induced plasma by Doppler-shift analysis of pump and probe measurements”, Appl. Phys. A 79, 1287-1290 (2004)


  8. B. Hopp
    , T. Smausz, Zs. Antal, N. Kresz, Zs. Bor, D. Chrisey: „Absorbing film assisted laser induced forward transfer of fungi (Trichoderma conidia)”, J. Appl. Phys. 96:Number 6, 3478-3481 (2004)


  9. Cs. Vass,
    T. Smausz, B. Hopp: “Wet etching of fused silica: a complex study”, J. Phys. D: Appl. Phys. 37, 2449-2454 (2004)


  10. B. Hopp
    , J. Kokavecz, T. Smausz, N. Kresz, S. Hild, O. Marti, Z. Bor: “Incubation investigation of ArF excimer laser irradiated poly(methyl-methacrylate) using pulsed force mode atomic force microscopy”, J. Appl. Phys. 96, 5548-5551 (2004)


  11. Antal Zs., Hopp B., Smausz T., Kresz N., Bor Zs., Douglas C.: „Egy Trichoderma törzs konídiumainak irányított, lézeres, térbeli mozgatása”, A Magyar Mikrobiológiai Társaság 2004. évi Nagygyűlése, Keszthely, Előadás kivonatok 1-2. (2004)


2005.


  1. B Hopp, T Smausz, N Barna, Cs Vass, Zs Antal, L Kredics and D Chrisey: „Time-resolved study of absorbing film assisted laser induced forward transfer of Trichoderma longibrachiatum conidia” J. Phys. D: Appl. Phys. 38 833-837 (2005)


  2. G. Kecskeméti, N. Kresz, T. Smausz, B. Hopp, A. Nógrádi: „Pulsed laser deposition of pepsin thin films” Applied Surface Science 247 83–88 (2005)


  3. Hopp Béla, Smausz Tamás, Kresz Norbert, Barna Norbert, Bor Zsolt, Kolozsvári Lajos, Douglas B. Chrisey, Szabó András, Nógrádi Antal: „Különböző élő sejtek túlélési és proliferációs képességei lézeres sejtmásolás után / Survival and proliferation ability of different types of living cell after laser-induced forward transfer”; A Magyar Szemorvostársaság 2005. évi Kongresszusa Annual Congress of the Hungarian Ophthalmological Society 2005


  4. L. Kolozsvári, A. Nógrádi, B. Hopp and T. Smausz: „UV absorbance of the human lens”, Ophthalmologische Nachrichten, Kongressausgabe, September, p. 9 (2005)


  5. B. Hopp, T. Smausz, N. Kresz, N. Barna, Zs. Bor, L. Kolozsvári, D.B. Chrisey, A. Szabó and A. Nógrádi: „Survival and proliferation ability of various living cell types after laser-induced forward transfer”, Tissue Engineering vol. 11, November 11/12 1817-1823 (2005)


  6. Hopp Béla, Smausz K. Tamás, Csete Mária, Tóth Zsolt, Kresz Norbert, Kecskeméti Gabriella, Bor Zsolt: Lézerek speciális orvosi és biológiai alkalmazási lehetőségei" Magyar Tudomány, 2005. 12. old. 1525


  7. T. Smausz, B. Hopp, N. Kresz, G. Kecskeméti, Zs. Bor: PULSED LASER DEPOSITION OF BIOLOGICAL AND BIOCOMPATIBLE THIN LAYERS, The 3rd European Medical and Biological Engineering Conference, EMBEC'05 Prague, Czech Republic November 20 – 25, 2005, IFMBE Proc. 2005 11(1) ISSN: 1727-1983 © 2005 IFMBE


  8. B. Hopp, T. Smausz, N. Kresz, Zs. Antal, Cs. Vass, Zs. Bor, L. Kolozsvári, D.B. Chrisey and A. Nógrádi: „LASER BIO-PRINTING OF CONIDIA AND LIVING CELLS USING ABSORBING FILM ASSISTED LASER INDUCED FORWARD TRANSFER”, The 3rd European Medical and Biological Engineering Conference, EMBEC'05 Prague, Czech Republic November 20 – 25, 2005, IFMBE Proc. 2005 11(1) ISSN: 1727-1983 © 2005 IFMBE


2006.


  1. G. Kecskeméti, T. Smausz, N. Kresz, Zs. Tóth, B. Hopp, D. Chrisey and O. Berkesi: “Pulsed laser deposition of polyhydroxybutyrate biodegradable polymer thin films using ArF excimer laser”, Appl. Surf. Sci., 253 (2006) 1185–1189


  2. N. Jegenyés, Z. Tóth, B. Hopp, J. Klebniczki, Z. Bor, C. Fotakis: „Femtosecond pulsed laser deposition of a-C films: the effect of double laser pulses” Applied Surface Science, Volume 252, Issue 13, 30 April 2006, Pages 4667-4671


  3. T. Smausz, B. Hopp, G. Kecskeméti, Zs. Bor: „Study on metal microdroplet content of the material transferred with absorbing film assisted laser induced forward transfer method when using silver absorbing layer”, Applied Surface Science, Volume 252, Issue 13, 30 April 2006, Pages 4738-4742


  4. A. Doraiswamy, R.J. Narayan, T. Lippert, L. Urech, A. Wokaun, M. Nagel, B. Hopp, M. Dinescu, R. Modi, R.C.Y. Auyeung and D.B. Chrisey Excimer laser forward transfer of mammalian cells using a novel triazene absorbing layer  Applied Surface Science, Volume 252, Issue 13, 30 April 2006, Pages 4743-4747


  5. Cs. Vass, D. Sebők, B. Hopp: „Comparing study of sub-picosecond and nanosecond wet etching of fused silica”, Applied Surface Science, Volume 252, Issue 13, 30 April 2006, Pages 4768-4772


  6. T. Smausz, B. Hopp, A. Nógrádi, L. Kolozsvári, N. Kresz, Zs. Bor: „Laser-based micropattern production from living cells”, The World Academy of BioMedical Technologies – WABT Conference, WABT-BIOMINT 2006, Budapest, Hungary


  7. Cs. Vass, K. Osvay and
    B. Hopp: “Fabrication of 150 nm period grating in fused silica by two-beam interferometric laser induced backside wet etching method”, 4 September 2006 / Vol. 14, No. 18 / OPTICS EXPRESS 8354


  8. B. Hopp
    , Cs. Vass, T. Smausz and Zs. Bor: “Production of submicrometer fused silica gratings using laser induced backside dry etching technique”, J. Phys. D: Appl. Phys. 39 (2006) 4843–4847


2007


  1. Cs. Vass, K. Osvay, B. Hopp, Z. Bor: „104 nm period grating fabrication in fused silica by immersion two-beam interferometric laser induced backside wet etching technique” Appl. Phys. A 87, 611–613 (2007)


  2. B. Hopp, T. Smausz, M. Bereznai: „Processing of transparent materials using visible nanosecond laser pulses” Appl. Phys. A 87, 77–79 (2007)


  3. R. Smajda, Á. Kukovecz,
    B. Hopp, M. Moh, Z. Kónya, I. Kiricsi: „Morphology and N2 permeability of multi-wall carbon nanotube– Teflon membranes” J. Nanosci. Nanotech. (2006) 7 (4-5): 1604-1610 APR-MAY 2007


  4. B. Hopp, T. Smausz, G. Kecskeméti, A. Klini and Zs. Bor: “Femtosecond pulsed laser deposition of biological and biocompatible thin layers”, Appl. Surf. Sci. 253, 7806-7809 (2007)


  5. B. Hopp
    , Cs. Vass and T. Smausz: “Laser induced backside dry etching of transparent materials”, Appl. Surf. Sci., 253, 7922-7925 (2007)


  6. N. Kresz, T. Smausz and B. Hopp: „Growth modeling of pulsed laser deposited Teflon thin layers based on the size distribution of the constituting particulates”, Appl. Surf. Sci. 253, 8160-8164 (2007)


  7. Cs. Vass,
    K. Osvay, M. Csete, B. Hopp: “FABRICATION OF 550 nm GRATINGS IN FUSED SILICA BY LASER INDUCED BACKSIDE WET ETCHING TECNIQUE”, Appl. Surf. Sci.,  253, 8059 2007


  8. Smausz T
    , Csizmadia T, Kresz N, Vass C, Márton Zs, Hopp B:Influence on the laser induced backside dry etching of thickness and material of the absorber, laser spot size and multipulse irradiation APPL SURF SCI 254: 1091-1095 (2007)


  9. P0600443 alapszámú magyar szabadalmi bejelentés „Eljárás átlátszó anyag közvetett impulzuslézeres megmunkálására”, bejelentve az USA-ban és Japánban is.


  10. Smausz T, Megyeri G, Kékesi R, Vass C, Hopp B, György E, Mihailescu I.N, „LASER DEPOSITION OF ACTIVE UREASE THIN FILMS” 9th International Conference on Laser Ablation September 24-28 2007 Tenerife, Spain


2008


  1. A. Nógrádi, B. Hopp, T. Smausz, G. Kecskeméti, Z. Bor, L. Kolozsvári, A. Szabó, A. Klini, C. Fotakis: „Directed Cell Growth on Laser-Transferred 2D Biomaterial Matrices” Open Tissue Engineering, 2008, 1, 1-7

  2. B. Hopp, T. Smausz, B. Papdi, Z. Bor, A. Szabó, L. Kolozsvári, C. Fotakis, A. Nógrádi: „Laser-based techniques for living cell pattern formation” Appl Phys A, 2008, 93: 45–49


  3. Cs. Vass, K. Osvay, T. Véső, B. Hopp, Zs. Bor: „Submicrometer grating fabrication in fused silica by interferometric laser-induced backside wet etching technique”, Appl Phys A (2008) 93: 69–73


  4. B Hopp, T Smausz, T Csizmadia, J Budai, A Oszkó and G Szabó: „Laser-induced backside dry etching: wavelength dependence”, J. Phys. D: Appl. Phys. 41 (2008) 175501 (6pp)


  5. Hopp Béla, Vass Csaba, Smausz Tomi, Szabó Gábor: „Átlátszó anyagok lézeres finommegmunkálása” Kvantumelektronika 2008, Budapest, 2008. október 17. M-3


  6. Smausz Tomi, Zölei Dániel, Hopp Béla: „Valós korrelációs idő meghatározás a lézeres szórási interferencián alapuló véráramlás-mérésben” Kvantumelektronika 2008, Budapest, 2008. október 17. P-58


  7. Vass Csaba, Hopp Béla, Osvay Károly, Bor Zsolt: „Átlátszó anyagok szubmikrométeres megmunkálása lézeres hátsóoldali folyadékos maratással” Kvantumelektronika 2008, Budapest, 2008. október 17. P-60


  8. Zalatnai Zámor, Papdi Bence, Csákó Tamás, Bor Zsolt, Hopp Béla: „Időfelbontásos transzmissió vizsgálat lézer-indukált hátsóoldali száraz maratás során” Kvantumelektronika 2008, Budapest, 2008. október 17. P-61


  9. Tomi Smausz, Dániel Zölei, Béla Hopp: “Determination of real, set-up independent correlation time and calibration possibility in laser speckle contrast analysis” Advanced Laser Technologies ALT08 conference, Siófok 2008.


  10. Zsibrita Balázs, Smausz Kolumbán Tomi, Hopp Béla:” Pepszin vékonyréteg előállítása MAPLE eljárással” Kvantumelektronika 2008, Budapest, 2008. október 17. P-62


  11. R. Böhme, Cs. Vass,
    B. Hopp, K. Zimmer: „Sub-wavelength ripples in fused silica after irradiation of the solid/liquid interface with ultrashort laser pulses”, NANOTECHNOLOGY Volume: 19 Issue: 49 Article Number: 495301 Published: 2008


2009


  1. T. Smausz, D. Zölei, and B. Hopp, "Real correlation time measurement in laser speckle contrast analysis using wide exposure time range images," Appl. Opt. 48, 1425-1429 (2009)


  2. T. Smausz, Z. Zalatnai, B. Papdi, T. Csákó, Zs. Bor, B. Hopp: „Time-resolved transmission study of fused silica during laser induced back-side dry etching” Appl. Surf. Sci., Appl. Surf. Sci. 255(10) (2009) 5405-5408


  3. B. Hopp, T. Smausz, Cs. Vass, G. Szabó, R. Böhme, D. Hirsch, K. Zimmer: „Laser-induced backside dry and wet etching of transparent materials using solid and molten tin as absorbers”,
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING   Volume: 94   Issue: 4 Pages: 899-904   Published: 2009


  4. E György, F Sima, IN Mihailescu, T Smausz, G Megyeri, R Kékesi,
    B Hopp, L Zdrentu, SM Petrescu. Immobilization of urease by laser techniques: Synthesis and application to urea biosensors. Journal of Biomedical Materials Research. Part A. Volume: 89A   Issue: 1   Pages: 186-191   Published: 2009


  5. T. Smausz, G. Megyeri, R. Kékesi, Cs. Vass, E. György, F. Sima, I. N. Mihailescu,
    B. Hopp: „Comparative study on Pulsed Laser Deposition and Matrix Assisted Pulsed Laser Evaporation of urease thin films”, Thin Solid Films, 517 (2009) 4299–4302


  6. T. Smausz,
    B. Hopp, and Z. Bor: „LASCA System Calibration for Single Exposure Time Measurements”, CL.P.15 CLEO®/Europe–EQEC 2009, International Congress Centre Munich, Germany, 14 - 19 June 2009


  7. B. Hopp, T. Smausz, B. Zsibrita and G. Szabó: „Deposition of pepsin thin layer using IR-MAPLE procedure”, CM.P.3 CL.P.15 CLEO®/Europe–EQEC 2009, International Congress Centre Munich, Germany, 14 - 19 June 2009


  8. Á Sipos, H. Tóháti, A. Szalai, A. Mathesz, M. Görbe
    a, T. Szabó, M. Szekeres, B. Hopp, M. Csete, I. Dékány, „Plasmonic structure generation by laser illumination of silica colloid spheres deposited onto prepatterned polymer-bimetal films”, Applied Surface Science 255 (2009) 5138–5145


2010


  1. E. György, F. Sima, I.N. Mihailescu, T. Smausz, B. Hopp, D. Predoi, L.E. Sima, S.M. Petrescu: „Biomolecular urease thin films grown by laser techniques for blood diagnostic applications” Materials Science and Engineering: C, Volume 30, Issue 4, 10 May 2010, Pages 537-541


  2. B. Hopp, T. Smausz, A. Nógrádi: „Absorbing-Film Assisted Laser Induced Forward Transfer of Sensitive Biological Subjects” Chapter 7, Cell and Organ Printing book, Springer Science+Business Media B.V. 2010, Editor: B.R. Ringeisen, B.J. Spargo, P.K. Wu; p: 115-133


  3. T. Csizmadia, T. Smausz, Cs. Vass and B. Hopp: „Laser-induced backside dry etching of transparent materials having significantly different thermal parameters”, RPI8, European Materials Research Society Spring Meeting, Strasbourg, Franciaország, 2010. Júni. 7-11


  4. Béla HOPP
    , Tomi SMAUSZ, Tamás CSIZMADIA, Csaba VASS, Tamás CSÁKÓ and Gábor SZABÓ: „Comparative Study of Different Indirect Laser-Based Methods Developed for Microprocessing of Transparent Materials”, JLMN-Journal of Laser Micro/Nanoengineering Vol. 5, No. 1, 2010 p: 80-85


  5. Csaba Vass, Judit Budai, Zoltán Schay and Béla Hopp: „Interpretation and Modeling of Laser-Induced Backside Wet Etching Procedure”, JLMN-Journal of Laser Micro/Nanoengineering Vol. 5, No. 1, 2010 p: 43-47


2011.


  1. T. Ajtai, Á. Filep, G. Kecskeméti, B. Hopp, Z. Bozóki, G. Szabó: „Wavelength dependent mass-specific optical absorption coefficients of laser generated coal aerosols determined from multi-wavelength photoacoustic measurements”, Appl Phys A (2011) 103:1165–1172


  2. Á. Györgyey, K. Ungvári, A. Forster, G. Kecskeméti, R. Szénási, B. Hopp, A. Oszkó, I. Pelsőczi, Z. Rakonczay, K. Nagy and K. Turzó: „Laser ablated titanium implants tested by MG63 osteoblast cell culture”, 45th Meeting of the Continental European Division of the International Association for Dental Research (CED-IADR), Budapest, Hungary, August 31-September 3, 2011, Abstract Book (0423)


2012.


  1. B. Hopp, G. Kecskeméti, T. Smausz, T. Ajtai, A. Filep, N. Utry, A. Kohut, Z. Bozóki, G. Szabó: „Characterization of excimer laser ablation generated pepsin particles using multi-wavelength photoacoustic instrument”; Applied Physics A, Volume 107, Issue 2, pp.429-435, 2012


  2. B. Hopp
    , T. Smausz, G. Szabó, L. Kolozsvári, D. Kafetzopoulos, C. Fotakis, A. Nógrádi: „Femtosecond laser printing of living cells using absorbing film assisted laser induced forward transfer; Opt. Eng. 51(1), 014302 (Jan 31, 2012). doi:10.1117/1.OE.51.1.014302


  3. Ferenc Domoki, Dániel Zölei, Orsolya Oláh, Valéria Tóth-Szuki,
    Béla Hopp, Ferenc Bari, Tomi Smausz: „Evaluation of Laser-speckle contrast image analysis techniques in the cortical microcirculation of piglets” Microvascular Research 83(3), 311–317 (2012)


  4. Dániel
    Zölei, Tomi Smausz, Béla Hopp, Ferenc Bari: „Multiple Exposure Time Based Laser Speckle Contrast Analysis: Demonstration of Applicability in Skin Perfusion Measurements” Photonics and Optoelectronics 1(2) 28-32 (2012)


  5. Gabriella Kecskeméti, Béla Hopp, Tomi Smausz, Zsolt Tóth, Gábor Szabó: „Production of porous PTFE–Ag composite thin films by pulsed laser deposition” Appl. Surf. Sci. 258, 7982– 7988 (2012)


2013.


  1. Cs. Vass, B. Kiss, J. Kopniczky, B. Hopp: ”Etching of fused silica fiber by metallic laser-induced backside wet etching technique”, Appl. Surf. Sci. 278 (2013) 241–244


  2. T. Csizmadia,
    B. Hopp, T. Smausz, I. Hanyecz, J. Kopniczky, and G. Szabó: „Application possibility of laser-induced backside dry etching technique for fabrication of SERS active surfaces” Appl. Surf. Sci. 278 (2013) 234–240


  3. T. Smausz, G. Kecskeméti, T. Csizmadia, F. Benedek,
    B. Hopp: „Study on the applicability of polytetrafluoroethylene-silver composite thin films as sensor material” Appl. Surf. Sci. 278 (2013) 117–121


  4. Ágnes Györgyey, Krisztina Ungvári, Gabriella Kecskeméti, Judit Kopniczky, Béla Hopp, Albert Oszkó, István Pelsöczi, Zoltán Rakonczay, Katalin Nagy, Kinga Turzó, „Attachment and proliferation of human osteoblast-like cells (MG-63) on laser-ablated titanium implant material”, Materials Science and Engineering C 33 (2013) 4251–4259


  5. Viktor Pajer, Ákos Tiboldi, Narkhyun Bae, Kongzhao Li
    , Sung Ung Kang, Béla Hopp, Lajos Kolozsvári, Gert Lubec, Antal Nógrádi: „The Molecular Background of the Differential UV Absorbance of the Human Lens in the 240–400 nm Range”. Photochemistry and Photobiology, 2013, 89: 856


  6. D. Zölei, T. Smausz, B. Hopp, F. Bari: „Self-tuning laser speckle contrast analysis based on multiple exposure times with enhanced temporal resolution”, J. Europ. Opt. Soc. Rap. Public. 8, 13053 (2013)


  7. Béla Hopp, Tomi Smausz, Tamás Csizmadia, Csaba Vass, Csaba Tápai, Bálint Kiss, Martin Ehrhardt, Pierre Lorenz, Klaus Zimmer: „Production of nanostructures on bulk metal samples by laser ablation for fabrication of low-reflective surfaces”, Appl Phys A DOI 10.1007/s00339-013-7913-y, 113, 291-296


  8. B. Hopp
    , T Csizmadia, T. Smausz, Cs. Tápai, J. Kopniczky, X. Wang, Martin Ehrhardt, P. Lorenz, K. Zimmer: „Production of Low-reflecting Surface Structure on Metal Samples”, P1-56, Conference on Laser Ablation, Ischia (Italy), October 6-11, ISBN 978-88-908116-1-6, 2013


  9. G. Kecskeméti, T. Smausz, Zs. Berta,
    B. Hopp, G. Szabó: „Pulsed laser deposition of PTFE-gold composite layers”, P2-11, ISBN 978-88-908116-1-6, Conference on Laser Ablation, Ischia (Italy), October 6-11, 2013


  10. T. Smausz, G. Kecskeméti, B. Kondász, G. Papp, Cs. Tápai,
    B. Hopp, G. Szabó: „Nanoparticle Generation From Nitinol Target Using Pulsed Laser Ablation”, P2-10, Conference on Laser Ablation, Ischia (Italy), ISBN 978-88-908116-1-6, October 6-11, 2013


  11. Zölei-Szénási Dániel, Smausz Kolumbán Tomi, Bari Ferenc, Domoki Ferenc, Hopp Béla: „A lézeres szórási interferencia jelenségének felhasználása szöveti vérellátás nagy pontosságú, költséghatékony mérésére” Fizikai Szemle, LXIII. évfolyam, 10. szám, 2013. október, 329-333.


  12. Dániel Zölei, Tomi Smausz, Béla Hopp, Ferenc Bari: „Near to real-time laser speckle contrast analysis based on multiple exposure times”, 20th International Conference on Medical Physics (ICMP2013) 2013. szeptember 1-4. Brighton Centre, Brighton, Nagy-Britannia


2014.
 

Klaus Zimmer, Martin Ehrhardt, Pierre Lorenz, Xi Wang, Csaba Vass, Tamás Csizmadia, Béla Hopp: „Reducing the incubation effects for rear side laser etching of fused silica”, Appl. Surf. Sci. Volume 302, 30 May 2014, Pages 42-45

Csizmadia, T.; Hopp, B; Smausz, T; Bengery, Z; Kopniczky, J; Hanyecz, I; Szabo, G: „Fabrication of SERS Active Surface on Polyimide Sample by Excimer Laser Irradiation”; ADVANCES IN MATERIALS SCIENCE AND ENGINEERING Article Number: 987286, DOI: 10.1155/2014/987286 Published: 2014

Tamás Csizmadia, Tomi Smausz, Csaba Tápai, Judit Kopniczky, Xi Wang, Martin Ehrhardt, Pierre Lorenz, Klaus Zimmer, Erika Varga, Albert Oszkó, Béla Hopp: „Comparation of the production of Nanostructures on Bulk Metal Samples by Picosecond Laser Ablation at Two Wavelengths for Fabrication of Low‐Reflective Surfaces” P41, 15th International Symposium on Laser Precision Microfabrication (LPM 2014), June 17-20, 2014, Vilnius, Lithuania

Tamás Csizmadia, Miklós Erdélyi, Tomi Smausz, Béla Hopp: „Simulation of the Reflective Properties of Microstructured Titanium Surface by Ray Tracing Method”, P42, 15th International Symposium on Laser Precision Microfabrication (LPM 2014), June 17-20, 2014, Vilnius, Lithuania

Tomi Smausz, Gabriella Kecskeméti, Bence Kondász, Gergely Papp, Zsolt Bengery, Judit Kopniczky, Béla Hopp: „Nanoparticle Generation From Nitinol Target Using Pulsed Laser Ablation” P44, 15th International Symposium on Laser Precision Microfabrication (LPM 2014), June 17-20, 2014, Vilnius, Lithuania

Hopp Béla, Csizmadia Tamás, Tápai Csaba, Vass Csaba, Kiss Bálint, Smausz Kolumbán Tomi:” NEM-REFLEKTÁLÓ NANOSTRUKTÚRÁK ELŐÁLLÍTÁSA TÖMBI FÉMFELÜLETEKEN FEMTOSZEKUNDUMOS LÉZERES BESUGÁRZÁSSAL”, FIZIKAI SZEMLE 2014 / 7–8, 230-232

Utry Noémi, Ajtai Tibor, Smausz Kolumbán Tomi, Kecskeméti Gabriella, Tápai Csaba, Pintér Máté, Hopp Béla, Bozóki Zoltán: „LÉZERGENERÁLT KOROM-AEROSZOLOK FOTOAKUSZTIKUS VIZSGÁLATA”, FIZIKAI SZEMLE 2014 / 7–8, 233-236

Pierre Lorenz, Tomi Smausz, Tamas Csizmadia, Martin Ehrhardt, Klaus Zimmer, Bela Hopp: „Shadowgraph studies of laser-assisted non-thermal structuring of thin layers on flexible substrates by shock-wave-induced delamination processes”, Appl. Surf. Sci. In press, APSUSC-28770 (2014)

P. Lorenz, M. Klöppel, T. Smausz, T. Csizmadia, M. Ehrhardt, K. Zimmer, B. Hopp: Time dependency of the laser-induced nanostructuring process of chromium layers with different thicknesses on fused silica, Appl. Surf. Sci. In press, APSUSC-28995 (2014)

F. Domoki, D. Zolei-Szenasi, O. Olah, V. Toth-Szuki, J. Nemeth, B. Hopp, F. Bari, T. Smausz : Comparison of cerebrocortical microvascular effects of different hypoxic-ischemic insults in piglets: a LASER-speckle imaging study, J Physiol Pharmacol. 2014 Aug;65(4):551-8.

Gabriella Kecskeméti, Tomi Smausz, Zsófia Berta, Béla Hopp, Gábor Szabó: Pulsed laser deposition of polytetrafluoroethylene-gold composite layers, Eur. Phys. J. A ppl. Phys. (2014) 68: 20302

Orosz László, Csizmadia Tamás, Smausz Tomi, Kopniczky Judit, Gilicze Barnabás, Hopp Béla: „Ns-os és fs-os excimer lézeres besugárzás hatására bekövetkező reflexióváltozás vizsgálata réz mintán”, P49, VII. Szimpózium a hazai kvantumelektronikai kutatások eredményeiről (Budapest, 2014. november 28.)

Kondász Bence, Kecskeméti Gabriella, Smausz Tomi, Tápai Csaba, Kopniczky Judit, Hopp Béla: „Nitinol nanorészecskék előállítása lézeres besugárzással”, P44, VII. Szimpózium a hazai kvantumelektronikai kutatások eredményeiről (Budapest, 2014. november 28.)

Vinkó József, Székely Péter, Szalai Tamás, Szatmáry Károly, Hopp Béla: „Lézerrel keltett lökéshullámok terjedésének hidrodinamikai modellezése”, P61, VII. Szimpózium a hazai kvantumelektronikai kutatások eredményeiről (Budapest, 2014. november 28.)

Novák Tibor, Kopniczky Judit, Smausz Tomi, Hopp Béla: „Képanalizáló eljárás grafén részecskék optikai mikroszkópos gyors azonosítására”, P48, VII. Szimpózium a hazai kvantumelektronikai kutatások eredményeiről (Budapest, 2014. november 28.)

Kohut Attila, Hopp Béla, Kopniczky Judit, Kószó Eszter, Szörényi Tamás, Geretovszky Zsolt: „Nanostruktúrált ezüst rétegek lézeres kialakítása és alkalmazásuk a száloptikás érzékelésben”, P43, VII. Szimpózium a hazai kvantumelektronikai kutatások eredményeiről (Budapest, 2014. november 28.)

Czimmer Sándor, Zölei-Szénási Dániel, Smausz Kolumbán Tomi, Domoki Ferenc, Hopp Béla, Bari Ferenc, Kemény Lajos: „Az élő szövetben mozgó vörösvértestek sebességeloszlásának meghatározása lézeres szórási interferencia képalkotással”, P32, VII. Szimpózium a hazai kvantumelektronikai kutatások eredményeiről (Budapest, 2014. november 28.)

Dániel Zölei, Áron Szrnka, Gábor Kozák, Ferenc Bari, Béla Hopp, Ferenc Domoki, Tomi Smausz: “Effect of multiple characteristic speeds on the laser speckle imaging”, International Conferences on Laser Applications in Life Sciences (LALS 2014), Ulm, Germany, 2014

Dániel Zölei, István Iványi, Tomi Smausz, Béla Hopp, Ferenc Bari, Lajos Kemény: ”Extension of the LASCA for the characterization of rosacea”, International Conferences on Laser Applications in Life Sciences (LALS 2014), Ulm, Germany, 2014